Rear Seat Cushion Frame Replacement (Tahoe/Yukon/Escalade with Split Bench)

Fig 1: View Of Rear Seat Cushion Frame & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove the recliner handle. Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) . Remove the outer finish cover. Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) . Remove the inner finish cover. Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) . Remove the cushion lower trim cover. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT) or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) . Remove the seat cushion cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Recliner Bolt (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Seat Riser Outer Bolt (Qty: 2) Tighten: 9 N.m (80 lb in)
3	Rear Seat Riser Inner Bolt Tighten: 9 N.m (80 lb in)
4	Rear Seat Cushion Frame Tip: Disconnect the rear seat strut from the seat cushion frame.