Rear Seat Cushion Frame Replacement (Tahoe/Yukon/Escalade with Bucket)

Fig 1: View Of Rear Seat Cushion Frame (With Bucket)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2)  or Rear Seat Replacement (Avalanche/Escalade EXT)  or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) .
1	Rear Seat Cushion Trim Panel Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT)  or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) .
2	Rear Seat Recliner Handle Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) .
3	Rear Seat Recliner Outer Finish Cover Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) .
4	Rear Seat Recliner Inner Finish Cover Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket)  or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) .
5	Rear Seat Riser Finish Cover Tip:  Tilt the seat assembly up and forward to gain access to remove the screw.
6	Rear Seat Riser Finish Cover
7	Rear Seat Cushion Cover and Pad Refer to Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket)  or Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
8	Rear Seat Recliner Bolts (Qty: 4) NOTE: Refer to Fastener Notice . Tighten:  9 N.m (80 lb in)
9	Rear Seat Cushion Frame Tip:  Disconnect the seat riser strut from the seat cushion frame.