Engine Coolant Fan Shroud Replacement (LUK)

Fig 1: Engine Coolant Fan Shroud (LUK)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement . Remove the radiator outlet hose from the radiator. Refer to Radiator Inlet Hose Replacement (LUK) . Disconnect the drive motor battery coolant/air separator from the cooling fan shroud. Refer to Drive Motor Battery Coolant/Air Separator Replacement . Disconnect the auxiliary radiator outlet hose from the generator. Refer to Auxiliary Radiator Outlet Hose Replacement . Disconnect the engine coolant fan motor electrical connectors. Unclip all wiring harness that are connected to the shroud.
1	Engine Coolant Fan Shroud Bolt (Qty:2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (88 lb in)
2	Engine Coolant Fan Shroud

Callout

Component Name

Preliminary Procedures

Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
Remove the radiator outlet hose from the radiator. Refer to Radiator Inlet Hose Replacement (LUK) .
Disconnect the drive motor battery coolant/air separator from the cooling fan shroud. Refer to Drive Motor Battery Coolant/Air Separator Replacement .
Disconnect the auxiliary radiator outlet hose from the generator. Refer to Auxiliary Radiator Outlet Hose Replacement .
Disconnect the engine coolant fan motor electrical connectors.
Unclip all wiring harness that are connected to the shroud.

Engine Coolant Fan Shroud Bolt (Qty:2)

CAUTION:

Tighten
10 N.m (88 lb in)

Engine Coolant Fan Shroud