Installing the luggage compartment, right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install luggage compartment capping
- Check the clip (1) and the clamp (2) and replace if needed.
- Install the luggage compartment side shelf (3) and position it correctly.
- Lock in the luggage compartment side shelf (3) at the clamp (4) .
- Tighten the screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Luggage compartment to body | ||
|---|---|---|
| Oval-head screw for thermoplastics | Tightening torque | 2 Nm |
| Plastic nut | Tightening torque | 1.8 Nm |
- Tighten nut (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Luggage compartment to body | ||
|---|---|---|
| Oval-head screw for thermoplastics | Tightening torque | 2 Nm |
| Plastic nut | Tightening torque | 1.8 Nm |
- Clip in the luggage compartment side shelf at the clip (2) .
- Tighten the screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Luggage compartment to body | ||
|---|---|---|
| Oval-head screw for thermoplastics | Tightening torque | 2 Nm |
| Plastic nut | Tightening torque | 1.8 Nm |
Follow-up work
- Refer to INSTALLING THE RIGHT D-PILLAR TRIM PANEL .
- Refer to INSTALLING THE RIGHT HINGE COVER .
- Refer to INSTALLING THE RIGHT C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE RIGHT SEAT BELT FINISHER STRIP .
- Refer to INSTALLING COVER FOR LUGGAGE COMPARTMENT ON RIGHT .
- Refer to INSTALLING THE BACKREST SIDE SECTION WITH THE RIGHT AIRBAG .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT TRIM PANEL ON THE RIGHT SIDE PANEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
- Refer to INSTALLING THE SWITCH FOR REMOTE BACKREST UNLOCKING .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING THE FRONT STORAGE SHELF .