Installing the right D-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing D-pillar trim panel

Check clamps (1) for damage; replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the D-pillar trim panel (1) correctly and clip it into the clamps (2) .
Ensure that the hinge cover fits correctly on the tailgate seal.

G16851372

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE RIGHT HINGE COVER .
Refer to INSTALLING COVER FOR LUGGAGE COMPARTMENT ON RIGHT .
Refer to INSTALLING THE FRONT STORAGE SHELF .