When replacing the center console
Preliminary work
- Refer to REMOVING THE TRIM PANEL FOR PEDAL ASSEMBLY .
- Refer to REMOVING RIGHT FOOTWELL TRIM .
- Refer to REMOVING THE REAR CENTER CONSOLE TRIM .
- Refer to REMOVING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to REMOVING THE CENTER STACK TRIM .
- Refer to REMOVING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
- Refer to REMOVING THE CENTER CONSOLE .
- Refer to REMOVING THE FRONT STORAGE COMPARTMENT FRAME .
- Refer to REMOVING BRACKET FROM THE CENTER CONSOLE TRIM .
- Refer to REMOVING THE CENTER CONSOLE TRIM .
- Refer to REMOVING CENTER ARMREST .
Removing the rear interior antenna
- Disconnect the connector (1) .
- Loosen the detents (2) .
- Remove the interior antenna (3)
from the center console (4)
.
Removing the front interior antenna
- Disconnect the connector (1) .
- Loosen screw (2) .
- Remove the interior antenna (3)
from the center console (4)
.
- Remove the wiring harness and remount the new center console.
Installing the interior antenna
- Position the interior antenna (3) on the center console (4) and clip in the detents (2) .
- Connect plug (1)
.
Installing the front interior antenna
- Position the interior antenna (3)
on the center console (4)
and tighten the screw (2)
.TIGHTENING TORQUE SPECIFICATION
Interior antenna Screw Tightening torque 2.3 Nm - Connect plug (1) .
Follow-up work
- Refer to INSTALLING CENTER ARMREST .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE BRACKET ON THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE FRONT STORAGE COMPARTMENT FRAME .
- Refer to INSTALLING THE CENTER CONSOLE .
- Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
- Refer to INSTALLING THE CENTER STACK TRIM .
- Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING RIGHT FOOTWELL TRIM .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .