Installing the center console trim
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Correctly position center console trim (1)
and clip it in at the clamps (2)
.
- Protect the gearshift lever against scratches.
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATION
Bracket to center console trim screw Tightening torque 1.8 Nm - Connect and lock the present connectors.
Follow-up work
- Refer to INSTALLING THE BRACKET ON THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE FRONT STORAGE COMPARTMENT FRAME .
- Refer to INSTALLING THE CENTER CONSOLE .
- Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
- Refer to INSTALLING THE CENTER STACK TRIM .
- Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING RIGHT FOOTWELL TRIM .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .