Installing the bottom automatic air flap control
- Connect the plug connection.
- Feed in the bottom automatic air flap control (2) .
- Tighten the screws (1)
.TIGHTENING TORQUES SPECIFICATION
Air flap control/brake ventilation duct Screw tightening torque 4 Nm
Follow-up work
- Refer to INSTALLING BUMPER COVER, FRONT .
- Refer to INSTALLING THE FRONT PART OF THE LEFT FRONT AND RIGHT WHEEL ARCH COVER (PARTIALLY REMOVED) .
- Refer to INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM (PARTIALLY REMOVED) .
- Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
- Refer to PUT THE FRONT RADAR SENSOR (FRS) OR FRONT RADAR SENSOR LONG RANGE (FRSF) INTO OPERATION .
- Refer to PUTTING THE FRONT RADAR SENSORS INTO OPERATION .