Installing the left and right front wheel arch trim (partially removed)

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the front wheel arch trim (partially removed)

Check

Check the clips (2) for damage and replace where required.
The sealing ring must not be damaged or missing.
Check the detents (1) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» The locks (1) of the wheel arch trim are damaged.

Measure
Replace wheel arch trim.
Engage the wheel arch trim (1) into the detents (2) in the area of the bumper cover.

Courtesy of BMW OF NORTH AMERICA, INC.