Install instrument panel trim

• Insert the instrument panel trim in the vehicle and position it at the support.
• Insert the associated wiring harnesses and connect the connectors.
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Use sound insulation (1).
• If installed: Connect the air hose (1) of the glove compartment to the connection (2) on the heating and air-conditioning unit.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the INSTRUMENT CLUSTER (KOMBI).
• Install the steering column SWITCH CLUSTER (SZL).
• Fit steering upper section column SHROUD .
• Install steering lower section column SHROUD .
• Install STEERING WHEEL .
• Install the M sports steering wheel AIRBAG UNIT .
• Install the steering wheel or sports steering wheel AIRBAG UNIT .
• Install the light OPERATING UNIT .
• Install the left dashboard SIDE PANEL .
• Install the right dashboard SIDE PANEL .
• Install left and right a-pillar TRIM PANEL .
• Install left FOLD-OUT COMPARTMENT .
• Install the left dashboard DECORATIVE STRIP .
• Install HEAD UNIT .
• Install radio operating unit and air conditioning CONTROL PANEL .
• Install the right dashboard DECORATIVE STRIP .
• Install the CENTRAL INFORMATION DISPLAY (CID).
• Install center dashboard DECORATIVE STRIP .
• Install right GLOVE COMPARTMENT .
• Install the CENTER CONSOLE .
• Install the right footwell TRIM PANEL .
• Install the pedal assembly TRIM PANEL .
• Install the front STORAGE COMPARTMENT .
• Install the center console TRIM .
• Install the rear center console TRIM .
• Reconnect all battery GROUND LEADS .
• Activate the 48 v ELECTRICAL SYSTEM .