Installing the drive cable of the front roller sunblind
- The drive cables (1) have a color coding at the end (2).
- Assignment of color coding:
Color Position Blue Front left White Front right Green Rear left red Rear right - Feed in the drive cable for the roller sunblind (1) in the guide (2) and push in to the stop position.
- Feed drive cable (2) of the mechanics (1) into the guide (3).
- Feed in drive cable (2) further forward and position the mechanics (1) on the roof frame.
- Make sure that the driver for the roller sunblind (3) and the guides of the drive cables (4) are correctly fed into the mechanics (1).
- Tighten the screws (2).
- Tighten nuts (3).
- Tighten down screw (1).
- Connect plug connection (1) and lock.
- Clip in the wiring harness (2).
Installing front drive system for roller sunblind
- Guide in the drive of the front roller sunblinds (3) and position it correctly.
- Tighten the screws (2).TIGHTENING TORQUES SPECIFICATION
Drive on body Screw tightening torque 8.60 Nm - Connect connectors (1) and lock.
Installing drive motor for glass slide/tilt sunroof cover
- Feed in the motor for the glass slide/tilt roof panel (3) and position it correctly.
- Tighten the screws (2).TIGHTENING TORQUES SPECIFICATION
Drive on body Screw tightening torque 8.60 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE ROLLING MODULE .
- Refer to PARTIALLY INSTALLING THE HEAD AIRBAG .
- Refer to CHECKING THE ROLLER SUNBLIND AND THE GLASS ROOF FOR FUNCTION .
- Refer to INSTALLING THE HEADLINING (LOWERED WITH PANORAMIC GLASS SUNROOF) .
- Refer to INSTALLING INTERIOR ROOF LIGHT .
- Refer to INSTALLING THE GRAB HANDLE AT THE REAR LEFT AND RIGHT .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE LEFT AND RIGHT FRONT VANITY MIRROR LIGHT .
- Refer to INSTALLING BOTH SUN VISORS AND COUNTER SUPPORTS .
- Refer to INSTALLING THE LEFT AND RIGHT HANDS-FREE MICROPHONE .
- Refer to INSTALLING THE C-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
- Refer to INSTALLING BOTH BACKREST SIDE SECTIONS .
- Refer to PARTIALLY INSTALLING BOTH B-PILLAR TRIM PANELS AT TOP .
- Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
- Refer to INSTALLING THE PANORAMA ROOF COVER .
- Refer to CHECKING THE ADJUSTMENT OF THE PANORAMA GLASS ROOF .
- Refer to ADJUSTING THE PANORAMA ROOF COVER .
- Refer to INSTALLING SEALING RING FOR THE PANORAMIC ROOF INSIDE .
- Refer to INITIALIZING PANORAMA GLASS ROOF .