Remove the trim panel for the storage shelf
NOTE:
TECHNICAL INFORMATION
Description is for left component only. Procedure on the right side is identical.
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING BOTH REAR SIDE TRIM PANELS .
- Refer to REMOVING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
- Refer to REMOVING RIGHT C-PILLAR TRIM PANEL LEFT AND RIGHT .
Precondition
Rear seat backrests are folded
- Loosen the expanding rivet (1).
- Lift the trim panel for the storage shelf (2) a little and disconnect the underlying plug connections.
- Guide trim panel for the rear window shelf (2) to the front out of the guides and remove.