Installing the glass roof

• Close panorama roof cover (1).
• Apply window glass adhesive in the area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TECHNICAL DATA SPECIFICATION
  
  

  Dimension of adhesive bead
  Use standard nozzle C.	A  8-1+1 mm
  Courtesy of BMW OF NORTH AMERICA, INC.	12-1+1 mm

  ADHESIVE SPECIFICATION
  
  

  Window glass adhesive (single cartridge)	300 ml, Rest of World	83192289286
  	300 ml, USA	83192289181
  	300 ml, CHN	83192180002

  ADHESIVE SPECIFICATION
  
  

  Window glass adhesive  USA

  300 ml, Cartridge

  83192289181

  ADHESIVE SPECIFICATION
  
  

  Window glass adhesive  CHN

  300 ml, Cartridge

  83192180002

• Attach the glass sunroof (1) with 2 suction lifters 0 492 609 (51 3 010)  .
• Align the glass sunroof (1) with the panorama roof cover (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TECHNICAL DATA SPECIFICATION
  
  

  Gap dimension glass slide/tilt sunroof panel to roof outer skin
  1 glass slide/tilt sunroof panel; 2 roof outer skin	a  0.6-0.75+0.75 mm
  Courtesy of BMW OF NORTH AMERICA, INC.

• Place both roof trim strips and align the glass sunroof (1) sideways evenly.
• Measure height a on all 4 corners between the glass sunroof (1) and roof frame (2) and correct where required.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BOTH THE ROOF TRIM STRIPS .
• Refer to INSTALLING THE REAR WINDOW .
• Refer to INSTALLING THE TRIM PANEL FOR THE STORAGE SHELF .
• Refer to INSTALLING THE C-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
• Refer to INSTALLING BOTH BACKREST SIDE SECTIONS .
• Refer to 3. INSTALLING THE BRAKE LIGHT .