Installing the front carpet

• Lay removed carpet on the new carpet (1)  and transfer cuts to new carpet (1)  .
• Cut off the highlighted area (2)  on the new carpet (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the carpet (1)  in the car.
• Make sure the carpet (1)  is positioned correctly at all adjacent parts and in area of heating and air-conditioning unit.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the wiring harness (1)  on to the brackets and connect and lock the connectors.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE AIRBAG CONTROL UNIT .
• Refer to INSTALLING ACCELERATOR PEDAL MODULE .
• Refer to INSTALLING THE TRIM PANEL FOR THE LOWER LEFT AND RIGHT BODY COLUMN .
• Refer to INSTALLING BOTH REAR SIDE TRIM PANELS .
• Refer to INSTALLING BOTH TRIM PANELS FOR THE BODY PILLAR .
• Refer to INSTALLING BOTH SEAT BELT FINISHER STRIP ELEMENTS .
• Refer to INSTALLING THE TRIM PANEL FOR THE TOP ROLLOVER PROTECTION .
• Refer to INSTALLING THE STORAGE NET .
• Refer to INSTALLING BOTH DOOR SILL COVER STRIPS .
• Refer to INSTALLING BOTTOM A-PILLAR TRIM PANEL .
• Refer to INSTALLING THE BOTTOM RIGHT A-PILLAR TRIM PANEL .
• Refer to INSTALLING THE LEFT AND RIGHT FRONT SEAT .
• Refer to INSTALLING THE CENTER CONSOLE .
• Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
• Refer to INSTALLING THE CENTER STACK TRIM .
• Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
• Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
• Refer to INSTALLING RIGHT FOOTWELL TRIM .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .