Install the bumper carrier in the front top

• Position the bumper carrier (1) at the front top.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Top front bumper support to top deformation element
  Hexagon screw M8x95	Tightening torque	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Fanfare horn to top front bumper support
  Hexagon screw	Tightening torque	11.8 Nm

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bracing strut to top front bumper support or to top connection
  M6x20 screw	Tightening torque	11.8 Nm

Follow-up work 

• Refer to INSTALLING IMPACT ABSORBER .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING FRONT LEFT AND RIGHT WHEEL ARCH COVER .
• Refer to PARTIALLY INSTALLING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT CENTER HOOD SEAL .
• Refer to INSTALLING HOOD SEAL ON LEFT AND RIGHT SIDES .
• Refer to CONNECTING THE BATTERY EARTH LEAD .