Connecting the battery earth lead
- Mount battery earth lead (3) on the negative battery terminal.
- Tighten nut (2).TIGHTENING TORQUE SPECIFICATIONS
Battery terminal clamp with IBS positive battery terminal/negative battery terminal Nut M6 Tightening torque 5 Nm - Connect the connector (1) to the IBS and lock it audibly.
Installing front windshield panel cover
- Guide in and install the front fairing panel cover (2) in the rear fairing panel cover (3).
- Ensure the front fairing panel cover (2) is seated correctly.
- Secure expanding rivet (1).
Installing the rear hood seal
NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details. - Install the hood seal (1) and make sure it has a correct fit.