Installing air duct to radiator

• Feed in air duct to radiator (2) with bracing strut (3).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air duct to deformation element
  M6x20 screw	Tightening torque	4.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bracing strut to top front bumper support or to top connection
  M6x20 screw	Tightening torque	11.8 Nm

• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air duct to cross connection
  M6x20 screw	Tightening torque	11.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INTAKE MANIFOLD FOR THE INTAKE FILTER HOUSING .
• Refer to INSTALLING THE BUMPER CARRIER IN THE FRONT TOP .
• Refer to INSTALLING IMPACT ABSORBER .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING FRONT LEFT AND RIGHT WHEEL ARCH COVER .
• Refer to PARTIALLY INSTALLING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT CENTER HOOD SEAL .
• Refer to INSTALLING HOOD SEAL ON LEFT AND RIGHT SIDES .
• Refer to CONNECTING THE BATTERY EARTH LEAD .