Remove brake booster
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING REAR HOOD SEAL .
- Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
- Refer to DISCONNECTING CABLE FROM BATTERY EARTH LEAD .
- Refer to REMOVING SUSPENSION CROSS-BRACE .
- Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING THE SYSTEM BATTERY .
- Refer to REMOVING THE EXPANSION TANK (VEHICLE WITH AUTOMATIC TRANSMISSION) .
- Refer to REMOVING THE TANDEM BRAKE MASTER CYLINDER .
- Refer to REMOVING LEFT AND RIGHT WIPER ARM .
- Refer to REMOVING THE GUTTER STRIP ON THE WINDSCREEN ON THE LEFT AND RIGHT .
- Refer to REMOVING THE REAR COWL PANEL .
- Refer to REMOVING THE CONSOLE FOR THE WINDSHIELD WIPER SYSTEM COMPLETE WITH ENGINE .
- Remove air duct (1)
.
- Pull the retaining clip (1)
off the brake pedal, detach and pull out retaining bolts (2)
.
- Loosen nuts (1)
.
- Remove check valve (1) from brake booster in the arrow direction.
- Unscrew the brake booster (1) from the firewall.