Remove the console for the windshield wiper system complete with engine

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work

Refer to REMOVING REAR HOOD SEAL .
Refer to REMOVING THE GUTTER STRIP ON THE WINDSCREEN ON THE LEFT AND RIGHT .
Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
Refer to REMOVING LEFT AND RIGHT WIPER ARM .
Refer to REMOVING THE REAR COWL PANEL .

Loosen nut (1).
Loosen screws (3).
Unlock the connector (2) and disconnect (see next illustration).
Remove the console for the windshield wiper system (4).

Courtesy of BMW OF NORTH AMERICA, INC.
Press the lock on the lower section of connector and disconnect the connector.

Courtesy of BMW OF NORTH AMERICA, INC.