Removing the tandem brake master cylinder
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING REAR HOOD SEAL .
- Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
- Refer to DISCONNECTING CABLE FROM BATTERY EARTH LEAD .
- Refer to REMOVING SUSPENSION CROSS-BRACE .
- Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING THE SYSTEM BATTERY .
- Refer to REMOVING THE EXPANSION TANK (VEHICLE WITH AUTOMATIC TRANSMISSION) .
- (1) Unfasten brake lines.
- Loosen the nuts (2) and remove the tandem brake master cylinder (3).