Removing intake silencer housing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Hot surfaces .
Risk of burning!

Perform all work only on components that have cooled down.

Preliminary work

Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .

Loosen the holder (1).
Loosen screw (2).
Unlock and release plug connection (3).
Unfasten clamp (4).
Pull out and remove the intake silencer housing (5) from the rubber mounts towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.