Overview - Rear Seat Backrest: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Backrest Is Divided Into 2/3 On The Right And 1/3 On The Left.
- 2/3 Right Backrest
- Vehicles with:
- Without the center armrest and storage compartment and without the center armrest and pass-through cover
- With the center armrest and storage compartment
- With center armrest and pass-through cover
- Removing and installing. Refer To REAR SEAT BACKREST, REMOVING AND INSTALLING .
- Vehicles with:
- Trim
- For the right lock
Vehicles with:
- With lock cylinder
- Without lock cylinder (not shown in the illustration)
- Overview. Refer To OVERVIEW - LOCKING MECHANISM TRIM .
- The trim with lock cylinder is destroyed when removed
- For the right lock
- Headrest
- Overview. Refer To OVERVIEW - HEADREST AND HEADREST GUIDE .
- Center Armrest
- With pass-through cover
- Equipment levels
- Overview. Refer To OVERVIEW - CENTER ARMREST, CENTER ARMREST WITH PASS-THROUGH DOOR .
- Center Armrest
- With storage compartment (armrest with lockable cover)
- Equipment levels
- Overview. Refer To OVERVIEW - CENTER ARMREST, CENTER ARMREST AND STORAGE COMPARTMENT, LOCKABLE STORAGE COMPARTMENT .
- The center armrest and storage compartment can only be removed and installed separately
- Center Armrest
- Without storage compartment with backrest cover and backrest trim
- Equipment levels
- Overview. Refer To OVERVIEW - CENTER ARMREST, CENTER ARMREST AND BACKREST COVER WITH TRIM .
- The center armrest as well as the backrest cover and trim can only be removed and installed separated.
- Left 1/3 Backrest
- Removing and installing. Refer To REAR SEAT BACKREST, REMOVING AND INSTALLING .
- Right Locking Mechanism
- Overview. Refer To OVERVIEW - LOCKING MECHANISM, BACKREST .
- Right release cable
- From the locking mechanism to the connector station
- Overview. Refer To OVERVIEW - LOCKING MECHANISM, BACKREST .
- Release Cable
- with handle for the right remote release
- Overview. Refer To OVERVIEW - LOCKING MECHANISM, RELEASE CABLE .
- Left Release Cable
- From the locking mechanism to the connector station
- Overview. Refer To OVERVIEW - LOCKING MECHANISM, BACKREST .
- Release Cable
- With hand for the left remote release
- Overview. Refer To OVERVIEW - LOCKING MECHANISM, RELEASE CABLE .
- Trim
- For the left lock
Vehicles with:
- With lock cylinder
- Without lock cylinder (not shown in the illustration)
- Overview. Refer To OVERVIEW - LOCKING MECHANISM TRIM .
- The trim with lock cylinder is destroyed when removed
- For the left lock
- Left Locking Mechanism
- Overview. Refer To OVERVIEW - LOCKING MECHANISM, BACKREST .
- Outer Bracket
- Quantity: 2
- Clipped into the backrest shell
- Removing and installing. Refer To OUTER BRACKET, REMOVING AND INSTALLING .
- Cover
- For the center bracket
- Removing and installing. Refer To CENTER STORAGE COMPARTMENT COVER, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Securing Bracket
- For the center bracket
- Removing and installing. Refer To SECURING BRACKET, REMOVING AND INSTALLING .
- Center Support
- Removing and installing. Refer To CENTER BRACKET, REMOVING AND INSTALLING .
- Inner Bracket
- Quantity: 2
- Removing and installing. Refer To INNER BRACKET, REMOVING AND INSTALLING .
- Bolts
- 16.5 Nm
- Quantity: 4