Overview - Center Armrest, Center Armrest And Storage Compartment, Lockable Storage Compartment
WARNING: This page is about a different variant/trim than selected.
- 2/3 Right Backrest
- Without pass-through
- Equipment levels
- Versions with center armrest with storage compartment (lockable backrest cover)
- Bracket
- With hinges
- Removing And Installing. Refer To BRACKET, REMOVING AND INSTALLING .
- Cover
- Removing and installing. Refer To COVER, REMOVING AND INSTALLING .
- Bolts
- 11 Nm
- Always replace if removed
- Self-locking
- Quantity: 4
- Storage Compartment (Backrest Cover)
- Removing and installing. Refer To LOCKABLE ARMREST STORAGE COMPARTMENT, REMOVING AND INSTALLING .
- Bolt
- 4 Nm
- Cap
- For storage compartment (cover for armrest)
- Can be removed only with the storage compartment (cover for armrest)
- Is not possible to separate from the storage compartment (cover for armrest)
- Center Armrest
- Removing and installing. Refer To CENTER ARMREST, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
- Bolt
- 4 Nm
- Rivet
- Rivet using the Pop Rivet Pliers:VAG1753B
- Nuts
- 8 Nm
- Quantity: 2