LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (4.2L - Engine Mechanical, Engine Code(S): BNS) >> 13 - Engine - Crankshaft, Cylinder Block >> Timing chain side, servicing operations >> Crankshaft seal (timing chain side), replacing

Crankshaft seal (timing chain side), replacing

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required 

Fig 1: Identifying Pulling Fixture T10122
GW00000440Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Identifying Extractor Hook T20143
GW00000441Courtesy of VOLKSWAGEN UNITED STATES, INC.

Work procedure 

Fig 3: Prying Out Sealing Ring Using Pulling Hook T20143/2
GW00015635Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 4: Identifying Seal, Sleeve T10122/1 And Assembly Tool T10122/2
GW00000443Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 5: Installing Pull Sleeve T10122/2 With Sealing Ring Onto Crankshaft
GW00017923Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 6: Pressing Seal Evenly All Around Until It Reaches Stop Using T10122/3
GW00017924Courtesy of VOLKSWAGEN UNITED STATES, INC.

The rest of installation is in reverse order of removal, note the following:

scientia non olet · About LEMON Manuals