LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (3.2L - Engine Mechanical, Engine Code(S): BKH) >> 13 - Engine - Crankshaft, Cylinder Block >> Timing chain side, servicing >> Crankshaft seal, timing chain side, replacing

Crankshaft seal, timing chain side, replacing

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required 

Fig 1: Identifying Pulling Fixture T10122
GW00000440Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Identifying Extractor Hook T20143
GW00000441Courtesy of VOLKSWAGEN UNITED STATES, INC.

Work procedure 

Fig 3: Prying Out Sealing Ring Using Extractor Lever T20143/2
GW00015635Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 4: Identifying Seal, Sleeve T10122/1 And Assembly Tool T10122/2
GW00000443Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 5: Installing Pull Sleeve T10122/2 With Sealing Ring Onto Crankshaft
GW00017923Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 6: Pressing In Sealing Ring All Around Evenly And Flush Using Pressure Sleeve T10122/3
GW00017924Courtesy of VOLKSWAGEN UNITED STATES, INC.

Further installation is in reverse order of removal, note the following:

scientia non olet · About LEMON Manuals