Installation position of gear selector mechanism

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installation Position Of Gear Selector Mechanism

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Selector rod

2 - Front push rod

3 - Gear selector lever

Arrow -A- Gear selection movement

Arrow -B- Gate selection movement

Fig 2: Shift Lever Knob And Protective Boot Remove/Install Components, Shift Lever And - Rear Push Rod And Shift Lever And - Front Push Rod

Courtesy of VOLKSWAGEN UNITED STATES, INC.

I - Removing and installing shift lever knob and protective boot. Refer to Shift lever knob and protective boot, removing and installing

II - Servicing shift lever and - rear push rod. Refer to Shift lever and rear push rod, servicing

III - Servicing shift lever and - front push rod. Refer to Selector rod and front push rod, servicing

Removing and installing selector mechanism. Refer to Shift mechanism, removing and installing

Adjusting gear selector mechanism. Refer to Shift mechanism, adjusting