LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Exterior System (Hood & Lids - Service Information)) >> 55 Hood, Lids >> Hood >> Release Cable, Removing And Installing >> Notes

Release Cable, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Release cable coupling. Refer to Release Cable Coupling: .

Release Cable, Engaging in Lid Lock. Refer to Release Cable, Engaging in Latch: 

Release Cable, Engaging in Release Lever. Refer to Release Cable, Engaging in Release Lever: .

Routing the release cable inside the passenger compartment. Refer to Release Cable Routing in Vehicle Interior: 

Routing the release cable inside the engine compartment. Refer to Release Cable Routing in the Engine Compartment: 

scientia non olet · About LEMON Manuals