LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Exterior System (Hood & Lids - Service Information)) >> 55 Hood, Lids >> Hood >> Release Cable, Removing And Installing >> Release Cable, Engaging in Latch:

Release Cable, Engaging in Latch:

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA55-10722Courtesy of AUDI OF AMERICA, LLC

-- Insert the release cable -2- into the operating lever -right arrow- inside the latch -1-.

-- Install the release cable with the guide into the latch from underneath. Make sure the hooks -left arrow- engage.

scientia non olet · About LEMON Manuals