Entry Assistance Assembly Overview, Coupe Only
NOTE:
The four-way lumbar support was not shown in the illustration for clarity purposes.
- Backrest frame
- Release cable adjuster
- for right release cable
- Cable tie
- Right release cable
- Removing and Installing, refer to LEFT AND RIGHT RELEASE CABLES, COUPE ONLY
- Pull-spring
- engaged in operating lever and release cables bracket
- Lever
- For the entry assistance handle
- Riveted to backrest frame
- Stop button
- For left and right release cable
- Do not disengage release cables from bracket
- left release cable
- Removing and Installing, refer to LEFT AND RIGHT RELEASE CABLES, COUPE ONLY
- Mount
- For left and right release cable
- Do not disengage release cables from bracket
- Bracket clipped into backrest frame
- Bolt
- 4 Nm
- Quantity: 2
- Trim with handle
- With entry assist
- Cannot be removed without destroying through 10.06
- Trim is clipped with bracket; refer to item 12
- Removing and Installing through 10.06, refer to TRIM WITH ENTRY ASSISTANCE HANDLE, COUPE ONLY THROUGH 10.06
- Removing and Installing from 11.06, refer to TRIM WITH ENTRY ASSISTANCE HANDLE, COUPE ONLY FROM 11.06
- Bracket
- With entry assist
- Bolted to backrest frame
- Removing and Installing, refer to ENTRY ASSISTANCE BRACKET, COUPE ONLY
- Release cable adjuster
- For left release cable
- left release cable bracket
- Riveted to backrest frame
- right release cable bracket
- Riveted to backrest frame
- Rivet
- Quantity: 2