LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> TT Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Frames (Roadster) >> Seat Frames >> Removal And Installation >> Power Front Seats >> Entry Assistance Bracket, Coupe Only

Entry Assistance Bracket, Coupe Only

NOTE:

The entry assistance bracket can be removed and installed with the front seat installed.

Removing 

-- Remove the entry assistance handle: through 10.06 refer to TRIM WITH ENTRY ASSISTANCE HANDLE, COUPE ONLY THROUGH 10.06 , from 11.06 refer to TRIM WITH ENTRY ASSISTANCE HANDLE, COUPE ONLY FROM 11.06 .

-- Remove bolts -1- (quantity: 2).

Fig 1: Identifying Entry Assistance Bracket Components
GWWA72-10370Courtesy of AUDI OF AMERICA, LLC

-- Remove the entry assistance bracket -2-.

NOTE:

The surrounding area was not shown in the illustration for clarity purposes.

Installation 

Install in reverse order of removal. Note the following:

-- Carefully slide entry assistance bracket under the opening in the cover. Do not damage cover when doing so.

-- Install the trim and entry assistance handle. Refer to TRIM WITH ENTRY ASSISTANCE HANDLE, COUPE ONLY THROUGH 10.06 .