Installing Brake Components On the Wheel Spindle

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the brake caliper. Use new screws. Tighten to 100 Nm
the screw for the drive shaft. Use a new screw. Counterhold using a screwdriver in the brake disc vents. Tighten. See Summary Of Tightening Torques For Specific Components
the ABS sensor. Check that the sensor seat in the wheel spindle is free of dirt. Tighten to 10 Nm .

Install the wheel

See Installing Wheels .