Overview - Timing Chain Cover

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Timing Chain Cover

Courtesy of AUDI OF AMERICA, LLC

Seal
- For the crankshaft
- Replacing. Refer to CRANKSHAFT SEAL, REPLACING, TRANSMISSION SIDE .
Sealing Flange
- Transmission side
- Removing and Installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, TRANSMISSION SIDE .
Bolt
- 23 Nm
Bolt
- Tighten diagonally in stages
- 8 Nm
Seal
- Quantity: 2
- For Camshaft Adjustment Valve 1 -N205- and Exhaust Camshaft Adjustment Valve 1 -N318-
- Replace if leaking or damaged
- Replacing. Refer to CAMSHAFT ADJUSTER VALVE SEAL, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Camshaft Position Sensor
- Camshaft Position Sensor -G40- and Camshaft Position Sensor 3 -G300-
O-Ring
- Quantity: 2
- Always replace after removing
Alignment Pins
- Quantity: 2
Cover
Cylinder Head Gasket
- Clean holes and fill with sealant. Refer to Installing: .
Alignment Pins
Bolt
- 10 Nm