Mounting Bracket, Removing And Installing, LHD Vehicle

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake pedal. Refer to BRAKE PEDAL, REMOVING AND INSTALLING, LHD .

-- Remove the Accelerator Pedal Module -GX2-. Refer to ACCELERATOR PEDAL MODULE -GX2-, REMOVING AND INSTALLING .

-- Remove the nuts -1 to 4-.

Fig 1: Brake Booster

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully remove the pedal assembly.

Installing

Install in the reverse order of removal while noting the following:

-- Connect the brake pedal with the brake booster. Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER .

Nut Tightening Sequence:

Fig 2: Brake Booster

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tightening Specifications

Refer to OVERVIEW - BRAKE PEDAL, LHD
Refer to OVERVIEW - INSTRUMENT PANEL CROSSMEMBER .
Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN VEHICLE INTERIOR .
Refer to OVERVIEW - KNEE AIRBAG
Refer to COMPONENT LOCATION OVERVIEW - STORAGE COMPARTMENT AND COVERS .
Refer to OVERVIEW - ACCELERATOR PEDAL MODULE .