LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> 4Runner TRD Pro >> Repair and Diagnosis >> Electrical >> Gauges >> Interior Panels / Trim - Service Information >> Front Console Box >> Disassembly [08/2015 - 08/2019] >> Procedure

Disassembly [08/2015 - 08/2019]: Procedure

  1. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY 

    Refer to PROCEDURE - Step 10

  2. REMOVE NO. 1 POWER OUTLET SOCKET COVER 

    Refer to PROCEDURE - Step 11

  3. REMOVE REAR CONSOLE END PANEL 
    1. Detach the 4 clips and 4 claws to remove the rear console end panel.
      GTY442536Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 power outlet socket assembly connectors.
  4. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY 

    Refer to PROCEDURE - Step 13

  5. REMOVE CENTER POWER OUTLET SOCKET COVER 

    Refer to PROCEDURE - Step 14

  6. REMOVE CONSOLE BOX REGISTER ASSEMBLY 
    1. Detach the 4 claws to remove the console box register assembly.
      GTY230536Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY 
    1. Remove the 6 screws and console compartment door sub-assembly.
      GTY236628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY 
    1. Remove the 2 screws and console compartment door lock sub-assembly.
      GTY230623Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY 
    1. Remove the 4 screws.
      GTY695621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver, detach the 6 claws to remove the console compartment inner door.
      TEXT IN ILLUSTRATION

      *1 Protective Tape

      HINT: 

      Tape the screwdriver tip before use.

    3. Remove the 4 screws and console compartment door hinge sub-assembly.
      GTY230535Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE CONSOLE CUP HOLDER BOX 
    1. Remove the 6 screws and console cup holder box.
      GTY230538Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 4

  12. REMOVE SEAT HEATER SWITCH (w/ Seat Heater System) 

    Refer to PROCEDURE - Step 4

  13. REMOVE SWITCH BASE 
    1. Remove the 2 screws and switch base.
      GTY230541Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for VF2A) 
    1. Detach the 6 claws to remove the shifting hole cover sub-assembly.
      GTY230540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE FRONT UPPER CONSOLE PANEL GARNISH 
    1. for VF2A:
      1. Detach the 6 claws to remove the front upper console panel garnish.
        GTY440781Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        TEXT IN ILLUSTRATION

        *A for VF2A
    2. for 2WD, for VF2BM, VF4BM:
      1. Detach the 10 claws to remove the front upper console panel garnish.
        GTY442824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        TEXT IN ILLUSTRATION

        *A for 2WD *B for VF2BM, VF4BM
  16. REMOVE NO. 2 BOX BOTTOM MAT (for 2WD) 
    1. Detach the 4 claws to remove the No. 2 box bottom mat.
      GTY230539Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE TRANSFER POSITION SWITCH (for VF2BM) 

    Refer to PROCEDURE - Step 3

  18. REMOVE TRANSFER POSITION SWITCH (for VF4BM) 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals