LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) (Except Hybrid) >> Satellite Radio Tuner >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. PRECAUTION (for Navigation Receiver Type) 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (Refer to PRECAUTION [10/2014 - ] ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Navigation Receiver Type) 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [10/2014 - 10/2015] Refer to INITIALIZATION [10/2015 - ] )

  3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 1 Refer to PROCEDURE - Step 1

  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 4

  5. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type) 

    See step  3

  6. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type) 

    Refer to PROCEDURE - Step 5

  7. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    See step  4

  8. REMOVE NO. 1 RADIO RECEIVER BRACKET 

    See step  5

  9. REMOVE NO. 2 RADIO RECEIVER BRACKET 

    See step  6

  10. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 10

  11. REMOVE NO. 1 NAVIGATION WIRE 
    1. Disconnect each connector to remove the No. 1 navigation wire.
      GTY475227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE STEREO COMPONENT TUNER ASSEMBLY