- REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
- Using a screwdriver, detach the claw to remove the reclining adjuster release handle LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
HINT:
Tape the screwdriver tip before use.
- REMOVE VERTICAL ADJUSTING HANDLE LH
- Remove the screw and vertical adjusting handle LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEAT CUSHION SHIELD LH
- Detach the 2 clips and claw.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the claw and 3 guides to remove the front seat cushion shield LH as indicated by the arrows in the order shown in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
First |
 |
Second |
- REMOVE FRONT INNER SEAT CUSHION SHIELD LH
- Detach the 2 claws and 3 guides to remove the front inner seat cushion shield LH as indicated by the arrows in the order shown in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
First |
 |
Second |
- REMOVE FRONT INNER SEAT CUSHION SHIELD RH (for Front Passenger Side)
- Detach the 2 claws and 3 guides to remove the front inner seat cushion shield RH as indicated by the arrows in the order shown in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
First |
 |
Second |
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
- Disconnect the rubber band.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the 4 wire clamps and connector clamp to disconnect the wire harness of the front seat side airbag.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *1 |
Wire Harness Clamp |
| *2 |
Connector Clamp |
- Detach the fastener to disconnect the wire harness of the front seat airbag assembly LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- for Front Passenger Side, Type A:
Remove the screw to disconnect the wire harness of the front seat inner belt assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- w/ Seat Heater System:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the connector clamp and wire harness clamp.
- Disconnect the connector.
- Detach the 2 hooks.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 4 bolts and separate type front seatback assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEAT HEADREST SUPPORT
- Detach the 4 claws to remove the 2 front seat headrest supports.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE SEPARATE TYPE FRONT SEATBACK COVER
- Remove the 5 hog rings.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 3 hog rings.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- for Sports Seat Type:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Open the 2 fasteners.
- Remove the 2 nuts.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Pull the separate type front seatback cover bracket from the separate type front seatback pad.
- Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEATBACK HEATER ASSEMBLY RH (w/ Seat Heater System)
Refer to PROCEDURE - Step 8
- REMOVE SEPARATE TYPE FRONT SEATBACK PAD
- Remove the separate type front seatback pad from the separate type front seatback spring assembly LH.
- REMOVE SEATBACK FELT
- Remove the seatback felt from the separate type front seatback spring assembly LH.
- REMOVE FRONT SEAT AIRBAG ASSEMBLY LH
Refer to PROCEDURE - Step 12
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
- for Driver Side:
- Detach the 12 hooks to remove the separate type front seat cushion cover with pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- for Front Passenger Side:
- w/ Seat Heater System:
Detach the 4 wire harness clamps and connector clamp to disconnect the wire harness of the front seat cushion heater.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *1 |
Wire Harness Clamp |
| *2 |
Connector Clamp |
- Detach the 11 hooks to remove the separate type front seat cushion cover with pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
- Remove the 21 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE SEAT POSITION AIRBAG SENSOR
Refer to PROCEDURE - Step 7
- REMOVE FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Front Passenger Side)
Refer to PROCEDURE - Step 9
- REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Seat Heater System)
Refer to PROCEDURE - Step 8
- REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
- Detach the 3 wire harness clamps and connector clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *1 |
Wire Harness Clamp |
| *2 |
Connector Clamp |
- Detach the wire harness clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the 2 clamps.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the nut and front seat inner belt assembly LH.
- REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
- for Type A:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disconnect the connector.
- Detach the clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the nut and front seat inner belt assembly RH.
- for Type B:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disconnect the connector.
- Detach the clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the nut and front seat inner belt assembly RH.
- REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)
- for Type A:
Disconnect the 4 connectors and detach the 6 clamps to remove the front seat wire RH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- for Type B:
Disconnect the 4 connectors and detach the 5 clamps to remove the front seat wire RH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)
Refer to PROCEDURE - Step 4
- REMOVE FRONT LOWER SEAT CUSHION SHIELD LH
- Remove the screw.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the hook in the direction indicated by the arrow in the illustration.
- Detach the clip to remove the front lower seat cushion shield LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT LOWER SEAT CUSHION SHIELD RH
HINT:
Use the same procedure described for the front lower seat cushion shield LH.
- REMOVE FRONT OUTER SEAT CUSHION EDGE PROTECTOR LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Remove the front outer seat cushion edge protector LH in the direction indicated by the arrow in the illustration.
- REMOVE FRONT INNER SEAT CUSHION EDGE PROTECTOR LH
HINT:
Use the same procedure described for the front outer seat cushion edge protector LH.
- REMOVE FRONT OUTER SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Remove the front seat outer cushion edge protector RH in the direction indicated by the arrow in the illustration.
- REMOVE FRONT INNER SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)
HINT:
Use the same procedure described for the front seat outer cushion edge protector RH.
- REMOVE SEAT TRACK ADJUSTING HANDLE
- Detach the 2 hooks to remove the seat track adjusting handle in the direction indicated by the arrow in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE SEAT ADJUSTER COVER CAP
- Remove the 2 seat adjuster cover caps from the separate type front seat cushion spring assembly LH.