LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension (Except Hybrid) >> Front Lower Suspension Arm >> Removal

Front Lower Suspension Arm: Removal

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    HINT:

    Remove engine assembly with transaxle (See REMOVAL ).

  2. REMOVE NO. 1 FRONT STABILIZER BRACKET LH  (See REMOVAL  )
  3. REMOVE NO. 1 FRONT STABILIZER BRACKET RH 

    HINT:

    Perform the same procedure as the LH side.

  4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY 
  5. REMOVE POWER STEERING LINK ASSEMBLY  (See REMOVAL )
  6. INSTALL ENGINE HANGERS  (See REMOVAL )
  7. SEPARATE FRONT FRAME ASSEMBLY  (See REMOVAL )
  8. REMOVE FRONT LOWER SUSPENSION ARM 
    1. Remove the 3 bolts, nut, and the front lower suspension arm from the front frame assembly. 
      Fig 1: Identifying Front Lower Suspension Arm Bolts
      G05417315Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front lower arm bushing stopper from the front lower suspension arm. 
scientia non olet · About LEMON Manuals