Front Stabilizer Bar: Removal

REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT:

Remove engine assembly with transaxle (See REMOVAL ).
SEPARATE FRONT STABILIZER LINK ASSEMBLY LH
1. Remove the nut and separate the front stabilizer link assembly LH.
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
  
  Fig 1: Identifying Front Stabilizer Link Assembly LH Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT:

Perform the same procedure as the LH side.
REMOVE NO. 1 FRONT STABILIZER BRACKET LH
1. Remove the 2 bolts and the No. 1 front stabilizer bracket LH from the front frame assembly.
  
  Fig 2: Identifying No. 1 Front Stabilizer Bracket LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 FRONT STABILIZER BRACKET RH
HINT:

Perform the same procedure as the LH side.
REMOVE FRONT STABILIZER BAR
REMOVE NO. 2 FRONT STABILIZER BRACKET LH
1. Remove the No. 2 front stabilizer bracket LH from the front stabilizer bar bushing.
REMOVE NO. 2 FRONT STABILIZER BRACKET RH
HINT:

Perform the same procedure for the LH side.
REMOVE NO. 1 FRONT STABILIZER BAR BUSHING
1. Remove the 2 No. 1 front stabilizer bar bushings from the front stabilizer bar.
  
  Fig 3: Identifying No. 1 Front Stabilizer Bar Bushings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002