Front Suspension Member: Installation

INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH
1. Temporarily install a new front suspension member body mounting rear cushion LH while confirming the installation direction.
  NOTE: Position the front suspension member body mounting rear cushion in the correct direction.
  
  Fig 1: Identifying New Front Suspension Member Body Mounting Rear Cushion LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install SST as shown below.
  SST 09830-10010 (09830-01010, 09830-01020, 09830-01030, 09830-01060)
  
  Fig 2: Identifying SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST, install the front suspension member body mounting rear cushion LH as shown below.
  NOTE: Check that there is no clearance between the front suspension member and the front suspension member body mounting rear cushion LH.
  
  Fig 3: Using SST To Install Front Suspension Member Body Mounting Rear Cushion LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
1. Temporarily install a new front suspension member body mounting rear cushion RH while confirming the installation direction.
  NOTE: Position the front suspension member body mounting rear cushion in the correct direction.
  
  Fig 4: Identifying New Front Suspension Member Body Mounting Rear Cushion RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, install the front suspension member body mounting rear cushion RH.
  SST 09830-10010 (09830-01010, 09830-01020, 09830-01030, 09830-01060)
  
  HINT:
  
  Perform the same procedure as the LH side.
INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION
1. Temporarily install a new front suspension member body mounting front cushion while confirming the installation direction.
  NOTE: Position the front suspension member body mounting front cushion in the correct direction.
  
  Fig 5: Identifying New Front Suspension Member Body Mounting Front Cushion
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, install the front suspension member body mounting front cushion as shown below.
  SST 09830-10010 (09830-01010, 09830-01020, 09830-01030, 09830-01060)
  
  NOTE: Check that there is no clearance between the front suspension member and the front suspension member body mounting rear cushion.
  
  Fig 6: Using SST To Install Front Suspension Member Body Mounting Front Cushion
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER
INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER
INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER
1. Install the front suspension member dynamic damper with the 2 bolts.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
  
  Fig 7: Identifying Front Suspension Member Dynamic Damper Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT LOWER SUSPENSION ARM LH (See REMOVAL )
INSTALL FRONT LOWER SUSPENSION ARM RH
HINT:

Perform the same procedure as the LH side.
INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (See INSTALLATION )
INSTALL FRONT FRAME ASSEMBLY (See INSTALLATION )
REMOVE ENGINE HANGERS (See INSTALLATION )
INSTALL POWER STEERING LINK ASSEMBLY (See INSTALLATION )
INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
INSTALL NO. 1 FRONT STABILIZER BRACKET LH (See INSTALLATION )
INSTALL NO. 1 FRONT STABILIZER BRACKET RH
HINT:

Perform the same procedure as the LH side.
INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
HINT:

Install engine assembly with transaxle (See INSTALLATION ).