LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Air Conditioning) >> Blower Unit >> Installation

Blower Unit: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL BLOWER ASSEMBLY 
    1. Install the blower assembly with the 3 screws.
    2. Fig 1: Identifying Evaporator Case From Blower Case And Screws
      G05585358Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AIR CONDITIONING UNIT 
    1. Install the air conditioning unit (see INSTALLATION  ).
  3. INSTALL AIR DUCT  (See INSTALLATION  )
  4. INSTALL LOWER INSTRUMENT PANEL 
    1. Install the lower instrument panel (see INSTALLATION ).
  5. INSTALL UPPER INSTRUMENT PANEL 
    1. Install the upper instrument panel (see INSTALLATION ).
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).