LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Audio System & Visual System) >> STEREO JACK ADAPTER ASSEMBLY (for Sedan) >> Installation

STEREO JACK ADAPTER ASSEMBLY (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEREO JACK ADAPTER ASSEMBLY 
    1. Connect the stereo jack adapter connector.
    2. Engage the 2 claws and install the stereo jack adapter.
      3. Fig 1: Locating Stereo Jack Adapter Connector
      G04833640Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT LOWER PAD  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL FINISH PANEL END  (See INSTALLATION )
  4. INSTALL REAR CONSOLE BOX ASSEMBLY  (See INSTALLATION )
  5. INSTALL REAR CONSOLE BOX CARPET  (See INSTALLATION )
  6. INSTALL REAR CONSOLE BOX UPPER REAR PANEL SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL REAR CONSOLE BOX UPPER PANEL SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

scientia non olet · About LEMON Manuals