REAR CONSOLE BOX (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR CONSOLE BOX ASSEMBLY
1. Engage the 4 claws and install the rear console box.
2. Install the 2 bolts and 2 screws.
3. Connect the clamp.
  
  Fig 1: Locating Rear Console Box Assembly Bolts And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE BOX CARPET
1. Install the console box carpet.
  
  Fig 2: Locating Console Box Carpet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
1. Connect the connector.
2. Engage the 3 clips and 3 claws and install the console upper rear panel.
  
  Fig 3: Identifying Console Upper Rear Panel Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
1. Engage the 5 clips and the claw and install the upper console panel.
  
  Fig 4: Identifying Upper Console Panel Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
1. Install the shift lever knob.
Fig 5: Identifying Shift Lever Knob Sub-Assembly (For Manual Transaxle)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)