LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Turn Signal Flasher Assembly >> Installation

Turn Signal Flasher Assembly: Installation

  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY 
    1. Install the clamp and the turn signal flasher assembly.
    2. Connect the connector.
    Fig 1: Locating Signal Flasher And Clamp
    G04980234Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL COMBINATION METER ASSEMBLY  (See INSTALLATION )
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Key System)  (See INSTALLATION )
  5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Key System)  (See INSTALLATION )
  6. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL STEERING COLUMN COVER  (See INSTALLATION )
  8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH  (See INSTALLATION )
  9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH  (See INSTALLATION )
  10. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals