LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brakes - Abs With EBD (DENSO Made) - Diagnostics >> Abs Warning Light Circuit (Remains On) >> Inspection Procedure

Inspection Procedure

  1. RECONFIRM DTC (SEE  DTC CHECK/CLEAR   ) 
    NORMAL AND MALFUNCTION CODE

    A Normal Code
    B Malfunction Code
    1. B: REPAIR CIRCUIT INDICATED BY OUTPUT DTC (SEE  DIAGNOSTIC TROUBLE CODE CHART   ) 

    A: Go to Next Step. 

  2. CHECK HARNESS AND CONNECTOR (SEE  ELECTRONIC CIRCUIT INSPECTION PROCEDURE  ) 
    1. Check the harness and connector between the skid control ECU and combination meter.
    1. NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK: Go to Next Step. 

  3. CHECK COMBINATION METER ASSY 
    1. Check the combination meter assy (see COMBINATION METER ).
    1. NG: REPAIR OR REPLACE COMBINATION METER ASSY (SEE  HOW TO PROCEED WITH TROUBLESHOOTING  ) 

    OK: CHECK AND REPLACE BRAKE ACTUATOR ASSY (SEE  REPLACEMENT  ) 

scientia non olet · About LEMON Manuals