LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Emission Control Systems (Aux. Emission Control Devices) (Except For HEV)) >> EGR Control Valve >> Removal >> 2.5 L Model

2.5 L Model

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the clip from the air intake boot, and loosen the clamp.
    G13875323Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Be careful not to pull out the PCV hose.
    G13875324Courtesy of SUBARU OF AMERICA, INC.
  4. Loosen the bolts holding the EGR cooler to the cylinder head RH.
    G13875771Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the EGR pipe. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO (EXCEPT FOR HEV))>EGR PIPE>REMOVAL .
  6. Remove the PCV hose No. 1. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO (EXCEPT FOR HEV))>PCV HOSE>REMOVAL>PCV HOSE NO. 1 .
  7. Remove the purge control solenoid valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO (EXCEPT FOR HEV))>PURGE CONTROL SOLENOID VALVE>REMOVAL>2.5 L MODEL .
  8. Disconnect the connector.
    G13875772Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the nuts securing the EGR cooler, and remove the stud bolts using TORX® E8.
    G13618697Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the EGR control valve from the intake manifold assembly.
    G13618698Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the EGR control valve from the EGR pipe adapter.
    G13224153Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals