LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT) (H6DO)) >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Ref. to REMOVAL , Automatic Transmission Assembly.
  2. Remove the air breather hose. Ref. to REMOVAL , Air Breather Hose.
  3. Remove the oil pan and control valve body. Ref. to REMOVAL , Control Valve Body.
  4. Remove the transmission harness. Ref. to REMOVAL , Transmission Harness.
  5. Remove the extension case. Ref. to REMOVAL , Extension Case.
  6. Remove the rear drive shaft. Ref. to REMOVAL , Rear Drive Shaft.
  7. Remove the transfer clutch assembly. Ref. to REMOVAL , Transfer Clutch.
  8. Remove the transfer reduction driven gear assembly. Ref. to REMOVAL , Transfer Reduction Driven Gear.
  9. Remove the intermediate case. Ref. to REMOVAL , Intermediate Case.
  10. Remove the forward clutch assembly. Ref. to REMOVAL , Forward Clutch Assembly.
  11. Remove the transmission case. Ref. to REMOVAL , Transmission Case.
  12. Remove the primary pulley, secondary pulley and variator chain. Ref. to REMOVAL , Primary Pulley and Secondary Pulley.
  13. Using the ST, remove the drive pinion retainer and lubrication pipe.

    ST 18270KA020 SOCKET (E20)

    Fig 1: Identifying Drive Pinion Retainer And Lubrication Pipe
    G06654671Courtesy of SUBARU OF AMERICA, INC.
  14. Remove the O-rings.
    Fig 2: Identifying O-Rings
    G06654672Courtesy of SUBARU OF AMERICA, INC.
  15. Remove the oil pump and the plate.
    Fig 3: Identifying Oil Pump And Plate Bolts
    G06654673Courtesy of SUBARU OF AMERICA, INC.
  16. Remove the O-rings.
Fig 4: Identifying O-Rings
G06654674Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals