Transfer Clutch: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the transmission assembly from the vehicle. Ref. to REMOVAL , Automatic Transmission Assembly.
Remove the extension case. Ref. to REMOVAL , Extension Case.
Remove the rear drive shaft. Ref. to REMOVAL , Rear Drive Shaft.
Remove the thrust needle bearing and needle bearing.

Fig 1: Identifying Thrust Needle Bearing And Needle Bearing
Courtesy of SUBARU OF AMERICA, INC.
Remove the transfer clutch assembly.

Fig 2: Identifying Transfer Clutch Assembly
Courtesy of SUBARU OF AMERICA, INC.
Remove the seal ring from transfer clutch assembly.

Fig 3: Identifying Seal Rings At Transfer Clutch Assembly

Courtesy of SUBARU OF AMERICA, INC.