LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H4DOTC) >> Crank Pulley >> Removal

Crank Pulley: Removal

NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. When working on the vehicle
    NOTE: When working on the vehicle, perform the following steps also.
    1. Remove the radiator main fan & fan motor assembly and radiator sub fan & fan motor assembly. Ref. to COOLING(H4DOTC)>Radiator Main Fan and Fan Motor>REMOVAL . Ref. to COOLING(H4DOTC)>Radiator Sub Fan and Fan Motor>REMOVAL .
  2. Remove the V-belts. Ref. to MECHANICAL (H4DOTC)>V-belt>REMOVAL>V-BELT .
  3. Use the ST to lock the crank pulley, and remove the crank pulley bolt.
    NOTE: To prevent damaging ST1, attach the ST2 onto the ST1 as shown.

    ST1 18355AA000 PULLEY WRENCH 

    ST2 18334AA000 PULLEY WRENCH PIN SET 

    Fig 1: Attaching ST2 Onto ST1
    G08316897Courtesy of SUBARU OF AMERICA, INC.

    ST1 18355AA000 PULLEY WRENCH 

    ST2 18334AA000 PULLEY WRENCH PIN SET 

    Fig 2: Removing Crank Pulley Bolt
    G11266798Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the crank pulley.
scientia non olet · About LEMON Manuals