Assembly and covering work when painting the center roof paneling - AR98.00-P-0209EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
Shown on model 212.0 with paint stage 2/3
| Masking, taping | |||
| Notes on paintwork repairs | AH98.00-P-9408-02A | ||
| General notes about painting the body flange in the glazing area | Pay attention to notes concerning the preparation of new parts such as the A-pillar, the roof or the side walls. | AH98.00-P-9408-06A | |
| General information on masking for paintwork | AH98.00-P-0200-01BK | ||
| 1 | Remove drip rail | AR88.80-P-4000EW | |
| 2.1 | Detach roof antenna | ||
| Model 212.0 up to model year 2011, 212.1 Model 212.2 up to model year 2011 |
AR82.70-P-8951EW | ||
| 2.2 | Remove cover for antenna | Model 212.0/2 as of model year 2011 | AR82.70-P-8952EW |
| 3 | Open glass tilting/sliding roof and mask off glass tilting/sliding roof | With code (414a) Power glass tilting/sliding roof Stegoband Paper rolls |
|
| 4 | Mask off mating surfaces around center roof paneling | Stegoband Masking tapes (set) Paper rolls |
|
| 5 | Cover complete vehicle | Cover |