LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Electrical System - Body - 212 Chassis - 2 Of 8) >> Basic Knowledge >> Speaker output function - GF82.62-P-4212FL

Speaker output function - GF82.62-P-4212FL

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212 

Function requirements for speaker output, general 

Speaker output, general 

A distinction is made between the following procedures:

Speaker actuation in the emergency call system is described in the following documents:

Speaker output in vehicles with CODE 810 (Sound system) 

The audio signals are routed from the audio equipment via MOST to the sound system amplifier control unit (N40/3), where they are amplified and output via the following speakers using direct lines:

For the bass speaker (H4/17) (model 212.0) or the bass speaker (H4/29) (model 212.2) the audio signal is routed from the audio equipment to the sound system amplifier control unit via MOST and from there to the woofer via the rear bass speaker amplifier (N40/9) using direct lines.

Speaker output in vehicles with CODE 811 (Advanced sound system) 

The audio signals are forwarded to the sound system amplifier control unit by the audio equipment via Media Oriented System Transport (MOST), where they are amplified and output via the following speakers using direct lines:

On vehicles up to 1.3.15, the sound system amplifier control unit forwards the audio signals for the speakers listed below to the rear woofer amplifier. The rear woofer amplifier actuates the following speakers via direct lines:

On vehicles as of 2.3.15, illumination for the left and right front door speakers, mirror triangle, is actuated by the sound system amplifier control unit.

On vehicles up to 1.3.15, illumination of the left and right front door speakers, mirror triangle, is actuated by the woofer amplifier.

During actuation of the speaker system, the volume is adapted to the noise level in the vehicle interior. To do so, the sound system amplifier control unit reads in the signals of the sound system microphone (B25/6).

Speaker output in vehicles except CODE 811 (Advanced sound system) and except CODE 810 (Sound system) 

The audio signals are output via the following speakers by the audio equipment using direct lines:

Speaker actuation in the event of voice output 

Only the front speakers are actuated for voice output as part of the following functions:

In vehicles except CODE 810 (Sound system) and CODE 811 (Advanced sound system), the following speakers are actuated for voice output:

In vehicles with CODE 811 (Advanced sound system), the following speakers are actuated for voice output:

In vehicles with CODE 810 (Sound system), the following speakers are actuated for voice output:

  Electrical function schematic for speaker system   PE82.62-P-2300-97DAA
  Overview of system components, telematics MODEL 212 as of 6/1/12 GF82.85-P-9999FLA
MODEL 212 up to 5/31/12 GF82.85-P-9999FL
scientia non olet · About LEMON Manuals